KF127RF87 Flange Mounted Combined Helical Bevel Gear Reducer
Paramedrau Technegol:
| Modelau sydd ar gael | KF47RF37, KF57RF37, KF67RF37, KF77RF37, KF87RF37, KF97RF37, KF107RF37, KF127RF77, KF127RF87,KF157RF97, KF167RF97, KF187RF97, KF157RF107, KF167RF107, KF187RF107 |
| Cymhareb | 5.36 ~ 179.86 (uchafswm: 13461) |
| Pŵer mewnbwn | 0.12 ~ 200 kW |
| Trorym Max | 200 ~ 50000 N.m |
DISGRIFIAD
K series bevel helical geared motors are angular geared motors where the gear unit output shaft is rotated through 90° to the motor shaft. Bevel helical geared units can either have a solid or a hollow shaft. Bevel helical geared motors represent the ideal solution for drive tasks where an angular geared motor with high power density is required with continuously high output torques.
You can achieve particularly low output speeds by using multi-stage gear units or multi-stage gearmotors. This means an additional second gear unit, usually a helical gear unit,is installed in front of the gear unit or between gear unit and motor. K series helical bevel gear unit with additional R series inline helical gear reducer is used for obtaining large ratios, available models: KA47R37, KA57R37, KA67R37, KA77R37, KA87R37, KA97R37, KA107R37, KA127R77, KA127R87, KA157R97, KA167R97, KA187R97, KA157R107, KA167R107, KA187R107, KF127RF87.
FLK bevel helical gearboxes are designed for continuous duty. The gearbox housings made of gray cast iron are developed in 3D CAD and have an optimized structure in terms of rigidity and vibration absorption. Radial shaft seals with dust-protection lips prevent oil from leaking out of the housing and dust and water from entering it. The gear wheels of the helical gear stages are milled and their surfaces hardened. The tooth flanks are ground or honed so that they are convex and corrected in terms of the profile. For the standard range, the bevel gear stage is milled, its surface is hardened, and it is lapped in pairs. Optimum running smoothness is also achieved thanks to the helical gears’ helical teeth. Positioning the bevel gear stage as the second stage means that less noise is emitted. The output shaft is positioned at a right angle to the input shaft.
NODWEDDION
- Mabwysiadu dyluniad wedi'i optimeiddio, cyfuniad modiwl.
- Allbwn ongl sgwâr, cymhwysiad eang.
- Mae'n mabwysiadu technoleg malu uwch a thechnoleg addasu siâp, sydd â chynhwysedd dwyn uchel, gweithrediad dibynadwy a sŵn isel.
- Perfformiad selio da, sy'n addas ar gyfer ystod eang o amodau gwaith.
- Effeithlonrwydd trawsyrru uchel ac arbed ynni.
- Gellir ei gyfuno â moduron amrywiol gydag ystod gymhareb ehangach
- Cost-effeithiol a hawdd i'w gynnal.
Ffurflen Cynnyrch
- Cam Trosglwyddo: 3 cam.
- Ffurflen Cynulliad: Wedi'i osod ar droed, wedi'i osod ar fflans, fflans fach B14 wedi'i gosod, braich trorym wedi'i gosod.
- Allbwn ongl sgwâr: Siafft solet, siafft wag (allwedd fflat, disg crebachu, spline involute), Siafft solet wedi'i hollti
Data Technegol
- Size: KF47RF37, KF57RF37, KF67RF37, KF77RF37, KF87RF37, KF97RF37, KF107RF37, KF127RF77, KF127RF87,KF157RF97, KF167RF97, KF187RF97, KF157RF107, KF167RF107, KF187RF107
- Data Technegol(N·m): 200 ~ 50000
- Cymhareb gêr: 5.36 ~ 179.86 （uchafswm: 13461）
- Pŵer Mewnbwn (kW): 0.12 ~ 200
Graddfa Pŵer Mewnbwn a Torque Allbwn
|
Maint |
37 | 47 | 57 | 67 | 77 | 87 | 97 | 107 | 127 | 157 | 167 | 187 |
|
Strwythur |
K.. CHI…KF..KAF..KAZ…KAT..KAB.. |
|||||||||||
|
Sgôr pŵer mewnbwn (kw) |
0.18-3 |
0.18-3 | 0.18-5.5 | 0.18-5.5 | 0.37-11 | 0.75-22 | 1.1-30 | 3-45 | 7.5-90 | 11-160 | 11-200 |
18.5-200 |
|
Cymhareb |
5.36-106.38 |
5.81-131.87 | 6.57-145.15 | 7.14-144.79 | 7.22-175.45 | 7.19-192.27 | 8.95-175.47 | 8.74-141.93 | 8.68-146.07 | 12.66-150.03 | 17.35-164.44 |
17.97-178.37 |
| Trorym uchaf (N.m) | 200 | 400 | 600 | 820 | 1550 | 2700 | 4300 | 8000 | 13000 | 18000 | 32000 |
50000 |
Available Models:
|
Fersiwn
|
Maint
|
||||||
|
37
|
47
|
57
|
67
|
77
|
87
|
||
|
K..
|
Blwch gêr befel helical wedi'i osod ar droed
|
K37
|
K47
|
K57
|
K67
|
K77
|
K87
|
|
Mae'r
|
Blwch gêr befel helical siafft wedi'i osod ar droed / gwag
|
KA37B
|
KA47B
|
KA57B
|
KA67B
|
KA77B
|
KA87B
|
|
KV..B
|
Wedi'i osod ar droed / siafft wag / Bocs gêr befel helical siafft gwag Splined
|
KV37B
|
KV47B
|
KV57B
|
KV67B
|
KV77B
|
KV87B
|
|
KH..B
|
Wedi'i osod ar droed / siafft wag / blwch gêr befel helical disg crebachu
|
KH37B
|
KH47B
|
KH57B
|
KH67B
|
KH77B
|
KH87B
|
|
KF..
|
Lleihäwr blwch gêr bevel helical wedi'i osod ar fflans B5
|
KF37
|
KF47
|
KF57
|
Kf67
|
KF77
|
Kf87
|
|
PRYNU..
|
B5 wedi'i osod ar fflans / blwch gêr befel helical siafft gwag
|
KAF37
|
KAF47
|
KAF57
|
KAF67
|
KAF77
|
KAF87
|
|
KVF..
|
B5 wedi'i osod ar fflans / Siafft wag / Blwch gêr befel helical siafft gwag Splined
|
KVF37
|
KVF47
|
KVF57
|
KVF67
|
KVF77
|
KVF87
|
|
KHF..
|
B5 wedi'i osod ar fflans / siafft wag / Blwch gêr befel helical disg crebachu
|
KHF37
|
KHF47
|
KHF57
|
KHF67
|
KHF77
|
KHF87
|
|
Mae'r ..
|
Blwch gêr bevel helical siafft gwag
|
KA37
|
KA47
|
KA57
|
KA67
|
KA77
|
KA87
|
|
KV..
|
Siafft wag / Splined siafft wag blwch gêr bevel helical
|
KV37
|
KV47
|
KV57
|
KV67
|
KV77
|
KV87
|
|
KH..
|
Siafft gwag / Disg crebachu blwch gêr bevel helical
|
KH37
|
KH47
|
KH57
|
KH67
|
KH77
|
KH87
|
|
KAT..
|
Siafft gwag / Braich Torque blwch gêr bevel helical
|
KAT37
|
KAT47
|
KAT57
|
KAT67
|
KAT77
|
KAT87
|
|
KAZ..
|
B14 Blwch gêr befel helical wedi'i osod ar fflans / siafft wag
|
KAZ37
|
KAZ47
|
KAZ57
|
KAZ67
|
KAZ77
|
KAZ87
|
|
KVZ..
|
B14 Wedi'i osod ar fflans / Siafft wag / Blwch gêr befel helical siafft gwag Splined
|
KVZ37
|
KVZ47
|
KVZ57
|
KVZ67
|
KVZ77
|
KVZ87
|
|
KHZ..
|
B14 wedi'i osod ar fflans / siafft wag / Blwch gêr befel helical disg crebachu
|
KHZ37
|
KHZ47
|
KHZ57
|
KHZ67
|
KHZ77
|
KHZ87
|
|
Fersiwn
|
Maint
|
||||||
|
97
|
107
|
127
|
157
|
167
|
187
|
||
|
K..
|
Lleihäwr gêr bevel helical ongl sgwâr wedi'i osod ar droed
|
K97
|
K107
|
K127
|
K157
|
K167
|
K187
|
|
Mae'r
|
Troed-osod / Hollow siafft ongl sgwâr helical offer lleihäwr bevel
|
KA97B
|
KA107B
|
KA127B
|
KA157B
|
KA167B
|
KA187B
|
|
KV..B
|
Wedi'i osod ar droed / siafft wag / Bocs gêr befel helical siafft gwag Splined
|
KV97B
|
KV107B
|
KV127B
|
KV157B
|
KV167B
|
KV187B
|
|
KH..B
|
Wedi'i osod ar droed / siafft gwag / blwch gêr befel disg crebachu helical
|
KH97B
|
KH107B
|
KH127B
|
KH157B
|
KH167B
|
KH187B
|
|
KF..
|
B5 Blwch gêr befel helical wedi'i osod ar fflans
|
KF97
|
KF107
|
KF127
|
KF157
|
Kne157
|
KF187
|
|
PRYNU..
|
B5 fflans-osod / siafft gwag lleihäwr blwch gêr befel helical
|
KAF97
|
KAF107
|
CAF127
|
KAF157
|
KAF167
|
KAF187
|
|
KVF..
|
B5 wedi'i osod ar fflans / Siafft wag / Blwch gêr befel helical siafft gwag Splined
|
KVF97
|
KVF107
|
KVF127
|
KVF157
|
KVF167
|
KVF187
|
|
KHF..
|
B5 wedi'i osod ar fflans / siafft wag / Blwch gêr befel helical disg crebachu
|
KHF97
|
KHF107
|
KHF127
|
KHF157
|
KHF167
|
KHF187
|
|
Mae'r ..
|
Blwch gêr bevel helical siafft gwag
|
KA97
|
KA107
|
KA127
|
KA157
|
KA167
|
KA187
|
|
KV..
|
Siafft wag / Splined siafft wag blwch gêr bevel helical
|
KV97
|
KV107
|
KV127
|
KV157
|
KV167
|
KV187
|
|
KH..
|
Siafft gwag / Disg crebachu blwch gêr bevel helical
|
KH97
|
KH107
|
KH127
|
KH157
|
KH167
|
KH187
|
|
KT..
|
Siafft gwag / Braich Torque blwch gêr bevel helical
|
KT97
|
KT107
|
KT127
|
KT157
|
Kt167
|
KT187
|
|
KAZ..
|
B14 Blwch gêr befel helical wedi'i osod ar fflans / siafft wag
|
KAZ97
|
KAZ107
|
KAZ127
|
KAZ157
|
KAZ167
|
KAZ187
|
|
KVZ..
|
B14 Wedi'i osod ar fflans / Siafft wag / Blwch gêr befel helical siafft gwag Splined
|
KVZ97
|
KVZ107
|
KVZ127
|
KVZ157
|
KVZ167
|
KVZ187
|
|
KHZ..
|
B14 wedi'i osod ar fflans / siafft wag / Blwch gêr befel helical disg crebachu
|
KHZ97
|
KHZ107
|
KHZ127
|
KHZ157
|
KHZ167
|
KHZ187
|
Blwch gêr K37, blwch gêr K47, blwch gêr K57, blwch gêr K67, blwch gêr K77, blwch gêr K87, blwch gêr K97, blwch gêr K107, blwch gêr K127, blwch gêr K157, blwch gêr K187,
Blwch gêr KF37, blwch gêr KF47, lleihäwr gêr KF57, blwch gêr KF67, blwch gêr KF77, blwch gêr KF87, blwch gêr KF97, blwch gêr KF107, blwch gêr KF127, blwch gêr KF157, blwch gêr KF187,
KA37 gearbox, KA47 gearbox, KA57 gearbox, KA67 gearbox, KA77 gearbox, KA87 gearbox, KA97 gearbox, KA107 gearbox, KA127 gearbox, KA157 gearbox, KA187 gearbox, KF127RF87
KAT37 gearbox, KAT47 gearbox, KAT57 gearbox, KAT67 gearbox, KAT77 gearbox, KAT87 gearbox, KAT97 gearbox, KAT107 gearbox, KAT127 gearbox, KAT157 gearbox, KAT187 gearbox, KF127RF87
KAF37 gearbox, KAF47 gearbox, KAF57 gearbox, KAF67 gearbox, KAF77 gearbox, KAF87 gearbox, KAF97 gearbox, KAF107 gearbox, KAF127 gearbox, KAF157 gearbox, KAF187 gearbox, KF127RF87
KAZ37 gearbox, KAZ47 gearbox, KAZ57 gearbox, KAZ67 gearbox,KAZ77 gearbox, KAZ87 gearbox, KAZ97 gearbox, KAZ107 gearbox, KAZ127 gearbox, KAZ157 gearbox, KAZ187 gearbox, KF127RF87
KA: allbwn siafft wag lleihäwr gêr bevel helical
KF: fflans-osod siafft solet allbwn blwch gêr bevel helical
KAF: fflans-osod siafft gwag allbwn blwch gêr befel helical
KAZ: B14 fflans gosod siafft gwag allbwn gearmotor bevel helical
KAT: trorym-braich-osod siafft gwag allbwn helical bevel gerio modur
KAB: blwch gêr lleihau befel helical allbwn siafft wag wedi'i osod ar droed
KVZ: Siafft wag wedi'i hollti gyda lleihäwr modur bevel helical flange B14
Math a Dynodiad
- Lleihäwr cyflymder modur sy'n gysylltiedig yn uniongyrchol: K－A－B－97－62.55－Y－5.5KW－4P－NZQ－M1－J1－ZZ－YR－S
- Gostyngydd cyflymder modur wedi'i gysylltu'n uniongyrchol (Math o gyfuniad): K－A－B－97－RF－Dd－57－62.55－Y－5.5KW－4P－M1－J1－ZZ－YR－S
- Gyda fflans modur a mewnbwn: K－A－B－97－62.55－AM132B5－Y－5.5KW－4P－M1－J1－ZZ－YR－S
- Mewnbwn wedi'i osod ar fflans, heb fodur: K－A－B－97－62.55－AM132B5－M1－J1－ZZ－YR－S
- Gyda siafft fewnbwn: K－A－B－97－62.55－OC4－M1－Z－S
Nodyn:
AM132B5: Dimensiwn fflans IEC (cyfeiriwch at ein catalog)
AD4: Siafft mewnbwn (AD1, AD2, AD3, AD4, AD5, AD6, AD7, AD8)
Cod Modur:
* Y: Moduron 3 cham safonol
* YB: Moduron atal ffrwydrad
*YEJ: motors brêc
*YD: Moduron aml-gyflymder
* YVP: Moduron amlder amrywiol
* YCT: Moduron rheoleiddio cyflymder electromagnetig
*YR: moduron craen a meteleg
* YVPEJ: Amledd amrywiol a moduron brêc
*YG: Moduron bwrdd rholio
*YGPEJ: Amledd amrywiol a moduron bwrdd brêc a rholio
Safle Mowntio
Safle Blwch Terfynell Modur
Lluniadu Strwythur
Dyluniad Modiwlaidd
Lluniau Cynnyrch
Cais:
K series helical bevel gear units are widely used in light industry, food, beer and beverage, chemical industry, escalators, automatic storage equipment, construction, machinery, iron and steel metallurgy, paper-making, wood-based panel machinery, automobile manufacturing, tobacco machinery, water conservancy, printing and packaging, pharmaceutical, textile, building materials, logistics, feed machinery, environmental protection and other fields.
