RM series Flange-mounted with extended bearing hub Inline Helical Geared Motor
| Malli | RM57, RM67, RM77 , RM87, RM97, RM107, RM137, RM147, RM167 |
| Suhde | 3.37~229.31 （imax:18126） |
| Syöttöteho | 0.12~160 kW |
| Lähtövääntömomentti | 130~18000 N.m |
DESCRIPTION
RM series kierukkavaihdemoottorit with extended output bearing hub are a special type of helical gearmotor. They were designed especially for agitating applications and allow for high overhung and axial loads and bending moments. Extended bearing handles large overhung loads for use in mixers and agitators.
Tuotelomake
- Transmission Stage: single stage, two stages, 3 stages or multi-stage combination.
- Assembly Form: Foot mounted, Flange mounted, B14 small flange mounted, with extended output bearing hub for agitator.
- Output Shaft: Solid shaft.
Tekniset tiedot
- Size: R37~R167
- Technical Data(N·m): 130~18000
- Gear Ratio: 3.37~229.31 （imax:18126）
- Tuloteho (kW): 0,12 ~ 160
Syöttöteho ja maksimivääntömomentti
|
Koko |
R17 | R27 | R37 | R47 | R57 | R67 | R77 | R87 | R97 | R107 | R137 | R147 | R167 |
|
Rakenne |
R RF |
||||||||||||
|
Nimellissyöttöteho (kw) |
0.18-0.75 | 0.18-3 | 0.18-3 | 0.18-5.5 | 0.18-7.5 | 0.18-7.5 | 0.18-11 | 0.55-22 | 0.55-30 | 2,2-45 | 5.5-55 | 11-90 |
11-160 |
|
Suhde |
3.83-74.84 | 3.37-135.09 | 3.41-134.82 | 3.83-167.65 | 4.39-189.69 | 4.29-165.48 | 5.21-195.24 | 5.36-246.54 | 4.49-264.42 | 5.06-245.5 | 5.15-223.34 | 5.00-163.46 |
8.77-196.41 |
| Suurin vääntömomentti (N.m) | 85 | 130 | 200 | 300 | 450 | 600 | 820 | 1550 | 3000 | 4300 | 8000 | 13000 |
18 000 |
| Single-stage | Koko | ||||||
| 57 | 67 | 77 | 87 | 97 | 107 | ||
| RX.. | Foot-mounted single stage inline helical gearmotor | RX57 | RX67 | RX77 | RX87 | RX97 | RX107 |
| RXF.. | Flange-mounted single stage inline helical gearmotor | RXF57 | RXF67 | RXF77 | RXF87 | RXF97 | RXF107 |
| Multi-stage | Koko | |||||||
| 17 | 27 | 37 | 47 | 57 | 67 | |||
| R.. | Foot-mounted coaxial helical gearmotor | R17 | R27 | R37 | R47 | R57 | R67 | |
| R..F | Foot-mounted and flange-mounted coaxial helical geamotor | R17F | R27F | R37F | R47F | R57F | R67F | |
| RF.. | Flange-mounted coaxial helical geamotor | RF17 | RF27 | RF37 | RF47 | RF57 | RF67 | |
| RM.. | Flange-mounted with extended bearing hub coaxial helical geamotor | RM17 | RM27 | RM37 | RM47 | RM57 | RM67 | |
| Multi-stage | Koko | |||||||
| 77 | 87 | 97 | 107 | 137 | 147 | 167 | ||
| R.. | Foot-mounted coaxial helical geamotor | R77 | R87 | R97 | R107 | R137 | R147 | R167 |
| R..F | Foot-mounted and flange-mounted coaxial helical geamotor | R77F | R87F | R97F | R107F | R137F | R147F | R167F |
| RF.. | Flange-mounted coaxial helical geamotor | RF77 | RF87 | RF97 | RF107 | RF137 | RF147 | RF167 |
| RM.. | Flange-mounted with extended bearing hub coaxial helical geamotor | RM77 | RM87 | RM97 | RM107 | RM137 | RM147 | RM167 |
Tyyppi ja nimitys
- Suoraan kytketty moottorin nopeudenrajoitin: RF－ F－ 107－ 92.7－ Y－ 5,5 kW－ 4P－ M1－ J1－ 350
- Directly-connected motor Speed reducer(Combination type): RF－ F－ 107－ RF－ F77－ 92.7－ Y－ 5,5 kW－ 4P－ M1－ J1－ 350
- With motor and input flange: RF－ F－ 107－ 92.7－ AM132B5－ Y－ 5,5 kW－ 4P－ M1－ 350
- Input flange-mounted, without motor: RF－ F－ 107－ 92.7－ AM132B5－ M1－ 350
- With input shaft: RF－ F－ 107－ 92.7－ AD4－ M1－ 350
Huomautus:
AM132B5: IEC-laipan mitat (katso kuvastomme)
AD4: tuloakseli (AD1, AD2, AD3, AD4, AD5, AD6, AD7, AD8)
Moottorikoodi:
*Y: 3-vaiheiset vakiomoottorit
*YB: Räjähdyssuojatut moottorit
* YEJ: Jarrumoottorit
*YD: Moninopeuksiset moottorit
* YVP: Vaihtuvataajuiset moottorit
*YCT: Sähkömagneettiset nopeudensäätömoottorit
*YR: Nosturi- ja metallurgiamoottorit
*YVPEJ: Taajuus- ja jarrumoottorit
*YG: Rullapöytämoottorit
*YGPEJ: Säädettävä taajuus ja jarru- ja rullapöytämoottorit
Asennusasento
Moottorin liitäntärasian asento
Rakennepiirustus
Modulaarinen suunnittelu
Tuotekuvia
Sovellus:
RM series helical gearmotors are widely used in light industry, food, beer and beverage, chemical industry, escalators, automatic storage equipment, construction, machinery, iron and steel metallurgy, paper-making, wood-based panel machinery, automobile manufacturing, tobacco machinery, water conservancy, printing and packaging, pharmaceutical, textile, building materials, logistics, feed machinery, environmental protection and other fields.
