PAPER MACHINE GEAR UNITS
Litekanyetso tsa Tekheniki:
| Mehlala e Fumanehang | B2SV04~B2SV18, B3SV04~B3SV26, B4SV05~B4SV26 |
| Karolelano | 5-400 |
| Matla a kenyang | 5.5 ~ 4400 kW |
| Torque e kholo | 6.1~900 kN.m |
TLHALOSO
B series helical bevel gear unit e na le sebopeho se kopaneng, moralo o feto-fetohang, ts'ebetso e ikhethang, le likhetho tse ngata tse tloaelehileng ho fihlela litlhoko tse ikhethileng tsa bareki.
Lebokose la gear ea bevel helical ke lebokose la liindasteri tse boima, tse sebetsang hohle ho matla a phahameng le maemo a phahameng a ho sebetsa a torque. E amohela ntlo ea tšepe e thata ea tšepe 'me sebopeho sohle se kopane ka moralo oa modular. Setsi sa lisebelisoa tsa bevel helical se tšoauoa ka matla a phahameng, ts'epahalo e ntlafalitsoeng ea ts'ebetso le ts'ebetso e eketsehileng ea phetisetso. Re ka fana ka shaft ea mofuta oa flange ho etsa hore ho kenngoe libakeng tse nyane.
The drive units for papermaking and finishing plants vary considerably with regard to type and size. In most cases, the reason for this is not so much the size of the plant as the kind of paper to be made – such as board, newsprint, filter, money, or art paper, to name but a few. The paper machine gear units provide an integral solution for power transmission.
LITŠOANTŠISO
- Amohela moralo o ntlafalitsoeng oa modular.
- Foromo ea tlhahiso ea angle e ka ho le letona.
- Mokokotlo oa phetisetso ea torque e ntle haholo, o loketse maemo a boima a boima.
- E amohela theknoloji e tsoetseng pele ea ho sila le theknoloji ea ho fetola sebopeho, e nang le bokhoni bo phahameng ba ho jara, ts'ebetso e tšepahalang le lerata le tlase.
- 'Mele oa lebokose o entsoe ka casting ea boleng bo holimo ho ntlafatsa matla a mochini le ts'ebetso ea seismic ea mochini o fokotsang.
- Ho na le likhetho tse ngata tsa ho kenya.
Foromo ea Sehlahisoa
- Mothati oa phetisetso: sethala sa 2, sethala sa 3, sethala sa 4.
- Ho hlongoa: Ho phahamisitsoe ka holimo, ho phahamisitsoe ka ho otloloha
- Sephetho se Tšoanang: Shaft e tiileng, Shaft e sekoti (senotlolo se bataletseng, shrink disk, involute spline), Shaft e tiileng e otlolohileng, shaft e petelitsoeng
Lintlha tsa Tekheniki
- Size: B2SV04~B2SV18, B3SV04~B3SV26, B4SV05~B4SV26
- Lintlha tsa Tekheniki(kN·m): 6.1~900
- Karolelano ea lisebelisoa: 5 ~ 400
- Matla a Kenang(kW):2.2~4400
FUMANEHLENG MEMELA
|
Mokhahlelo oa phetiso |
Karolelano(i) |
Mehlala |
|
B2 |
5 - 14 |
B2SV4, B2SV5, B2SV6, B2SV7, B2SV8, B2SV9, B2SV10, B2SV11, B2SV12, B2SV13, B2SV14, B2SV15, B2SV16, B2SV17, B2SV18 |
|
B3 |
12.5 - 90 |
B3SV4, B3SV5, B3SV6, B3SV7, B3SV8, B3SV9, B3SV10, B3SV11, B3SV12, B3SV13, B3SV14, B3SV15, B3SV16, B3SV17, B3SV18, B3SV19, B3SV20, B3SV21, B3SV22, B3SV23, B3SV24, B3SV25, B3SV26 |
|
B4 |
80-400 |
B4SV4, B4SV5, B4SV6, B4SV7, B4SV8, B4SV9, B4SV10, B4SV11, B4SV12, B4SV13, B4SV14, B4SV15, B4SV16, B4SV17, B4SV18, B4SV19, B4SV20, B4SV21, B4SV22, B4SV23, B4SV24, B4SV25, B4SV26 |
Mofuta le Tlhophiso
Mounting Position
Sets'oants'o sa Sebopeho
MOKHOPO MOLAPO
LITŠOANTŠISO HLAHANG
B3SV14 Transmission Gearbox Flender standard
Li-gearbox tsa B3SH16 tsa indasteri
B3KV8-20-A Boima ba Lisebelisuoa tsa Gear
B3HV10-18-A-F gearbox FLK
Kopo:
Right angle bevel gearbox can modularly compose with other reducers and mechanical variator, get a large reduction ratio drive and variation, Conveyors, Cranes and Hoists, Elevators, Escalators, Fans, Gates, Irrigators, Machinery, Mixers, Packaging Equipment, Pools, Specialty Trucks and Vehicles, Wind Turbines, X-Ray Equipment, Airports, Boats and Yachts, Energy Installations (Deserts, Wind Farms), Foundries, Off-shore Oil Rigs, Mining Sites, Factories, Supermarkets, Refineries, Ports, Railways, Farms.
